Zirconia Sintering Furnace
7"HD touch screen
PID intelligent temperature control
Heating rate <100°c/min
The fastest sintering time: 3.5 hours (including temperature rise, heat preservation and temperature drop)
These high-temperature furnaces are ideally suited for sintering bridges and crowns made of translucent zirconia.
| Dimension | 361mmx360mmx555mm |
| Weight | 50KG |
| Power source | 220V 50/60Hz or 110V 50/60Hz |
| Maximum power | 2500w |
| Maximum sintering temperature | 1700°C |
| Heating rate | <100°C/min |
| Temperature control accuracy | 士1°C |
| Touch screen | 7"HD touch screen |
| Crucible size | Length*width*height=100mm*100mm*35mm. can put up to 3 layers of crucible; |
1. Dental-specific silicon molybdenum rod, which does not contaminate the teeth. It offers fast heating with a rate of up to 10o° C/min.
2. High-purity insulation material, free from contamination, ensuring uniform temperature distribution and preventing issues like under-sintering or color discrepancies.
3. PID intelligent temperature control system, providing high temperature control accuracy with a precision of ± 1° C.
4. Power-off memory function allows the furnace to resume operation from any temperature on any curve.
5. Extended warranty period with a 6-month warranty for consumables and a 1-year warranty for the entire machine.
6. Large furnace capacity: The furnace can simultaneously accommodate three layers of crucibles. Crucible size: Length*width*height=100mm*100mm*35mm.
These high-temperature furnaces are ideally suited for sintering bridges and crowns made of translucent zirconia. The special heating elements made of molybdenum disilicide promise very good protection against chemical interaction between the charge and the furnace components. The bridges and crowns are loaded in ceramic saggars. These high-temperature furnaces are particularly convincing due to their very good price-performance ratio. The furnaces can be individually programmed for all recommended sintering curves by almost all zirconium manufacturers.
Due to their maximum temperature of 1560 °C and their large furnace chamber, the high-temperature sintering furnaces are perfectly suited for sintering translucent zirconia. The electrically driving lifting table significantly simplifies the charging of the high-temperature furnace. The all-around heating of the cylindrical furnace chamber ensures a very even temperature uniformity.
The high-temperature sintering furnaces are additionally equipped with a drying as well as a forced cooling function. For residual drying, the oven remains open gapwise during heating up to a defined temperature and thus ensures reliable removal of moisture. For accelerated cooling, the furnace is automatically opened step by step under program control. Depending on the batch used and the saggars, these high-temperature furnaces can achieve total cycle times of less than two and a half hours. The furnaces can be individually programmed for all recommended sintering curves of all zirconia manufacturers.
Inquire Now 
