7 "HD touch screen
PID intelligent temperature control
Heating rate <100°C/min
The fastest sintering time: 2hours (including temperature rise, heat preservation and temperature drop)
The high-temperature speed sintering furnace S9 sinters up to 25 single crowns within two hour
The allround heating of the furnace chamber with three heating elements made of molybdenum disilicide ensures a very good temperature uniformity and fast heating times can be achieved.
| Dimension | 498mmx346mmx811mm |
| Weight | 70KG |
| Power Supply | 220V 50/60Hz 110V 50/60Hz |
| Maximum Power | 2500w |
| Maxmum Sintering Temperature | 1700°c |
| Heating Rate | ≤100℃/min |
| Temperature Control Accuracy | ±1℃ |
| Crucible Size | Diameter * height =100mm*35mm can put up to 3 layers of crucible |
7"HD touch screen
Heating rate: <100℃/min
Maximum sintering temperature: 1700℃
100 programs, Preset common zirconium block program
PID intelligent temperature control, high temperature control accuracy,temperature control accuracy of ±1℃
Large furnace capacity: the furnace can accommodate three layers of crucible at the same time;
Heating rate <100℃/minThe fastest sintering time:
2 hours (including temperature rise, heat preservation and temperature drop)
Heating element: dental special high purity silicon molybdenum rod, no pollution. Insulation material: dental special high purity 1800 aluminum silicate ceramic fiber
The high-temperature speed sintering furnace S9 was developed for the speed sintering of 25 single crowns made of translucent zirconium oxide up to a maximum temperature of 1700 °C. The entire sintering process can be completed within one hour. The furnace ideally suited for chairside production at the dentist or for urgent jobs in the dental laboratory. The electrically driving lifting table enables convenient charging. The allround heating of the furnace chamber with three heating elements made of molybdenum disilicide ensures a very good temperature uniformity and fast heating times can be achieved. The special insulation with low heat capacity additionally ensures short cooling times. The heating elements tailored to the process avoid chemical interactions between the charge and the furnace components as best as possible and offer a long service life
The crowns are placed in a saggar made of technical ceramics. The high-temperature speed sintering furnace S9 sinters up to 25 single crowns within two hour. It can be programmed for all common temperature curves for speed sintering translucent zirconium oxide.
The colored, high-contrast 7 inch touch display enables convenient program input on the large screen. Programs can be displayed graphically and in tabular form. With the free NeunoRton App, the furnace can be conveniently monitored online via mobile devices as a powerful addition to the NeunoRton controller. The process progress can be tracked, push notifications provide information about malfunctions.
Inquire Now 
